Skip to content

Bosch Solution 6000 LAN Power Supply 5 AMP + 2x BATTCHGR (RS485) | F.01U.275.894

  • 5 Amps total combined output current
  • Charge up to 2 x 7.2Ah or 1 x 18Ah standby batteries
  • Remotely interrogate power supply status via RAS
  • Resettable fuse protected with deep discharge protection built-in
  • Easily installed into MW720 or MW730 enclosures
Voltage Input:100-240V AC @ 2.0A 50-60Hz
Stand-by Battery:Up to 2 x 12V DC 7.2Ah sealed rechargeable battery Panasonic LC-P12R2P or equivalent or 1 x 12V DC 18Ah sealed rechargeable batteryResettable fuse protected @ 6 Amps
Voltage Output:13.8V DC @ 5 Amps (Primary supply source only)
Battery Discharge Cycle:AC Off: Keypads indicate trouble condition, AV Fail report resent (if programmed)13.8V DC :Charging level11.5V DC: Low battery trouble at keypads, low battery report sent (if programmed)10.0V: DC Shut down and battery disconnected as voltage falls below 9V DC.
Battery Recharge Cycle:AC On: Panel restarts, battery charging begins. AC trouble clears from keypads, AC restore report sent (if programmed).12.8V DC: Battery trouble clears from keypads, battery restore report sent (if programmed).13.8V DC: Battery float charged.
Connection (RS485 LAN):Max total LAN length using multi strand security cable = 300mMax total LAN length using 2 pair twisted shielded data cable (Belden 8723) = 1200m
Temperature:0o to 55oC Operating
Humidity:5% to 85% at 30oC non condensing
Dimensions:50(W) x 23(D) x 58(H)mm