All Products

TP16500A is a 240v 50Hz to 16Vac 1.5A plug pack and with a three core flexible lead which includes an earth connection Fully tested and approved t...

The TIM-01 Universal Timer Module has been designed to provide eight field programmable functions controlling a SPDT relay from 1 second t...

Suitable for either 12Vdc or 24Vac (on-board switch), the use of PDM5-1A minimises the likelihood of a total system shutdown in the event of a shor...

The PDM6-1A power distribution module features 10 resettable 1A polyswitch fused outputs, a common fault relay output to signal the failure of indi...

Suitable for either 12Vdc or 24Vac (on-board switch), the use of PDM5-250  minimises the likelihood of a total system shutdown in the event of a sh...

Suitable for either 12Vdc or 24Vac (on-board switch), the use of PDM5-500  minimises the likelihood of a total system shutdown in the event of a sh...

The 12Vdc powered RLB8-DP features a strip of eight (8) individual dual buffered, Double Pole / Double Throw (DPDT) Relays which share a common pow...

Tactical 12V/24DC Jumper Selectable SPDT Dual Input, Buffered Relay Board. [30VDC 6A Contacts] - Strip Of 8 DIN Rail Mount

The RLB8-SPDT-V2 relay board from Tactical Power Products features a strip of eight (8) individual dual buffered, Single Pole / Double Throw (SPDT)...

The RLB1-DPDT is a 12v DC powered buffered relay board. The relay features a transistor buffered input which may be triggered by any positive DC vo...

The RLB8-DPDT-V2 features a strip of eight (8) individual dual buffered, Double Pole / Double Throw (DPDT) Relays which share a common power rail.

The RLB8-DPDT-V2 features a strip of eight (8) individual dual buffered, Double Pole / Double Throw (DPDT) Relays which share a common power rail

PDM8-12V features an integrated monitored fire trip input via 22K EOL resistor or non monitored via voltage trip, each of the eight outputs can be ...

PDM8-24V features an integrated monitored fire trip input via 22K EOL resistor or non monitored via voltage trip, each of the eight outputs can be ...

Takex External Reflective Beam As wiring is needed only on the sensor unit, you can use it in places where it is difficult to wire on two sides On...

The professional choice in outdoor protection, our Quad beam detectors synchronise 16 beam paths for maximum stability in severe weather conditions...

The PA-6800 series ceiling mount indoor PIR sensors combine a discreet compact appearance with outstanding performance at a low price. The sensor c...

Balck Takex Snap-In PA-6800 Series Ceiling Mount PIR Sensors Combines a discreet compact appearance with outstanding performance  Can be snapped i...

The PA-6800 series ceiling mount indoor PIR sensors combine a discreet compact appearance with outstanding performance at a low price. The sensor c...

The PB-IN-HF series is the flagship of the TAKEX range of infrared photoelectric beams. By synchronizing 16 beam paths between Transmitter and Rece...

The MS-100E is designed for indoor and outdoor use Offers the choice of Wide Angle, Horizontal Curtain, Vertical Curtain and Long Range detection u...

TX-114TR TX-114FR up to 12m x 90° up to 12m x 180°   With ultra-low current consumption for long battery life, and solid state (NO/NC) ou...

Contact Size: 1″×.84″(25mm×21.3mm) Standard Magnet Size: 1″×.84″(25mm×21.3mm) Standard Gap: 1.1″(28mm) Colors: White, Brown 12″(305mm) 22 AWG Leads...

Contact Size: .75″×.84″(19.05mm×21.3mm) Standard Magnet Size: .75″×.84″(19.05mm×21.3mm) Standard Gap: 1.1″(28mm) Colors: White, Brown12″(305mm) 22 ...

Contact Size: .35″×.75″(9mm×19mm) Standard Magnet Size: .35″×.75″(9mm×19mm) Standard Gap: 0.6″(15mm) Colors: White, Brown 12″(305mm) 22 AWG Leads S...

Contact Size: .35″×.75″(9mm×19mm)Standard Magnet Size: .35″×.75″(9mm×19mm)Standard Gap: 0.6″(15mm)Colors: White, Brown12″(305mm) 22 AWG Leads Stand...

Contact Size: .37″×1.26″(9.5mm×32mm) Standard Magnet Size: .37″×1.26″(9.5mm×32mm) Standard Gap: .6″(15mm) Colors: White, Brown 12″(305mm) 22 AWG Le...

Contact Size: 2.13″L×1.37″W×.37″H(54mm×34.7mm×9.5mm) Standard Magnet Size: 2.64″L×2.13″W×1.13″H(67mm×54mm×28.7mm) Standard Gap: 2.5″(64mm) Colors: ...

Contact Size: 4.22″L×1.73″W×.47″H (107.2mm×44mm×12mm) Standard Magnet Size: 4.13″L×2.42″W×1.5″H (105mm×61.7mm×38mm) Standard Gap: 2″(50mm) Colors: ...

Contact Size: 1.24″L×.31″W×.31″H(33mm×8mm×8mm) Standard Magnet Size: 1.24″L×.31″W×.31″H(33mm×8mm×8mm) Standard Gap: .71″(18mm) Colors: White, Brown...

Tane Commercial Surface Mount Armoured Cable Roller Shutter Reed Switch  Contact Size: 2″L×.74″W×.37″H (51mm×18.8mm×9.5mm) Standard Magnet Size: 2...

A linear power supply used to supply power to remote products at 13.8 Volts DC. Enclosed in a metal box with room for a 6.5AH battery & tamper ...

The CA111x series of keypads combines advanced remote arming station and keypad functionality, smart card reader (CA1115 and CA1116 only), ease of ...

The keypad may be connected directly to the Challenger RS-485 LAN, up to 1.5 km from the Challenger panel or Intelligent Access Controller. It has ...

TS082x series of data gathering panels (DGPs) are used to expand the number of inputs and outputs (or relays) on the Challenger system. DGPs allow ...