Skip to content

The MiniProx® proximity card reader's potted electronics and slim, attractive design are ideal for indoor or outdoor mounting.

  • Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.

Key Features

  • Accepts 5- to 16-volts, meeting most voltage requirements.
  • Available with Wiegand or Clock-and-data interface.
  • Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
  • Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
  • Mounts directly onto metal with no change in read range performance.
  • Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.

Typical Maximum Read Range
ProxCard® II Card - up to 5.5" (14 cm)
ISOProx® II Card - up to 5" (12.7 cm)
DuoProx® II Card - up to 5" (12.7 cm)
Smart ISOProx®/DuoProx® cards - up to 5" (12.7 cm)
Proximity & MIFARE® Card - up to 5" (12.7 cm)
ProxCard Plus® Card - up to 2" (5.1 cm)
ProxKey® II Keyfob - up to 2" (5.1 cm)
MicroProx® Tag - up to 2.5" (6.4 cm)

*Depending on local installation conditions.

Dimensions
6.0" x 1.7" x 1.0"(15.2 x 4.3 x 2.54 cm)

Power Supply
Standard MiniProx: 5-16 VDC
Haz. Loc. MiniProx: 5-16 VDC
Linear power supplies are recommended.

Current Requirements
Average: 30 mA (5 VDC); 20 mA (12 VDC)
Peak: 110 mA (5 VDC); 110 mA (12 VDC)

Operating Temperature
-22° to 150° F (-30° to 65° C)

Operating Humidity
0-95% relative humidity non-condensing

Weight
With terminal strip: 3.5 oz. (99 gm)
With pigtail: 3.8 oz. (108 gm)
Haz. Loc. MiniProx: 3.8 oz. (108 gm)

Cable distance
Wiegand interface: 500 feet (150 m)
Clock-and-data interface: 50 feet (15 m)
Recommended cable is ALPHA 1295 (22 AWG)
5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.

Please Contact Zankap